MK-III RTN-LR Weather Station

$940.00

Long Range MK-III Weather Station without Rain Gauge

The MK-III weather station offers improved durability and serviceability. This sleek new design is 33 inches high and weighs just over 7 pounds. It is the most accurate, durable and easiest to install weather station available.

SKU
800-0010

The long-range MK-III-LR features a powerful new 2.4 GHz spread spectrum radio that increases range to 1-mile line of sight.  It also features an industry best, real time 2 second wind speed and direction update interval.

Please note: To receive the readings and display them on a computer, wall display, or cloud based system, a receiving unit is required. Receiving units that work with this device are:

Product Features:

  • The solar charged battery supply is guaranteed to operate below 60 degrees latitude. The MK-III will operate for at least 60 days without sun.
  • Since there is no connection between the sensors and the power line, damage from thunderstorms is virtually eliminated and the sensors are immune to power line voltage surges.
  • The initial sensor calibrations for wind, temperature, relative humidity and barometric pressure are traceable to the National Institute of Standards and Technology.
  • The passive solar shield for the temperature and humidity sensors are modeled after the ones designed by the National Weather Service. All materials used in the weather station and weather instruments have been chosen for their durability and resistance to weathering and corrosion.
  • All of our weather station hardware is stainless steel. The station is fabricated from fiberglass and structural PVC and is ultra-violet inhibited. The optional Mono Mount is made from powder coated steel and is supplied with bolts for mounting.

RainWise Misc Downloads

This document is the instructions for changing your RH/T (also known as Relative Humidity and Temperature Sensor) This is for the version 80 sensors, most recent for MKIII Products in 2019/2020.

This document is the instructions for changing Cables for either the Mini Aervane or Relative Humidity and Temperature Sensors or Both.

RainWise MK-III Weather Station Downloads

Installation guide to install and change a 6V battery on an MK-III Weather Station

RainWise MK-III Weather Station Manuals

RainWise MK-III Troubleshooting Documents

This is the part replacement instructions for a Mini-Aervane (also known as) a Anemometer. This is for the MKIII, and earlier version Weather Stations, Agromet, and Telemet Stations.

Product Questions

The MK-III Weather Station is powered by a rechargeable 6 volt / 5 AMP Hour Battery.  It is a rechargeable battery that is recharged daily by the solar panel attached to the weather station sensor assembly.

... Permalink

Please see our guidance here for changing the battery in my MK-III weather station:

Installation guide to install and change a 6V battery on an MK-III Weather Station

... Permalink